JYS-NS191 bluetooth Gamepad for Nintendo Switch Left and Right Small NFC Dual Vibration TURBO Game Controller

How to pair the controller to the Switch for the first time 1 The Switch host must be on If the host is in sleep or off state the handle cannot be paired2 When the handle cannot be awakened or the LED indicator continues to flash slowly please charge your handle before using it For the first connection and pairing please refer to the following steps 1 Turn on the Switch host 2 Install the handle on the Switch host and use the slide on the side of the host to slide the handle from top to bottom until you hear a slight click 3 The handle starts to register and pair automatically After the pairing is successful it can be plugged into the host for use or it can be removed and used via Bluetooth After the handle is installed on the host the pairing cannot be registered Please refer to the following methods to check the pairing problem 1 Make sure your host has been upgraded to the latest system2 Press the pairing button to close the handle reset the connection of the handle and then plug the handle into the host3 Insert the handle into the host make sure the direction of insertion is correct it slides to the end and a slight click sound is heard4 Unplug the handle from the host try to insert it again and rule out that it cannot be paired because of the lack of contact5 If the handle cannot be awakened please charge your handle before trying to pair How to pair connect back the controller to the Switch again After the handle is paired for the first timПроизводитель: JYS